If you are looking for a simple and easy way to mount foam panels in your home studio, these mounts are for you.

They're easy to remove, so perfect for renters or those of us who like to refresh our home layout every so often and need something convenient and flexible.

You can use them on both walls and ceilings.

These mounts are designed to work with common 1ft x 1ft acoustic foam panels that you can get pretty much anywhere online. Both the 1" and 2" variety, plus corner bass traps.

They should work with any foam panel, though they were originally designed for those ones.

These mounts prioritise ease of mounting and flexibility over acoustic perfection. Unless you're a professional mixer or building a high-end studio, they'll likely do you fine.

If you do want to maximise the acoustic properties of the foam panels, they should really be mounted completely flush to the wall. That's why they are traditionally glued to the wall.

If that level of acoustic perfection is what you really want, we'd actually strongly encourage you to look at better panels in the first place! The common 1" and 2" panels are rarely studio-grade in the first place, and need perfect placing to do their full job.

For most of us - with home studios or looking for an improved sound for our audio - killing the ping and main reflections will be fine.

In short, if you need simplicity, ease of mounting, and flexibility with moving and removing then get these mounts. If you need acoustic perfection, invest in proper panels!

You can attach them to your wall with small adhesive strips or 3mm screws. (We designed them to fit the small Command Strips exactly.)

They grab on to your panels thanks to the spikes. No need for glue. So you can remove, replace or reorient the panels without damaging them.

You have two choices in your approach:
a) use the dedicated Corners, Tees and Crosses for the best grip and placement
b) use the cheaper Ends and Connectors, though you'll need to be a bit more intentional about where you put them.

NB: For the corner trap panels that fit your room's corners (wall-to-wall or wall-to-ceiling) use the Ends and Connectors.

You can either measure out and mark the wall and place the mounts exactly (if you're good at measuring!), or you can first stick them to the panels and offer the panel up to your wall with them already in place. If you're building a grid with the Corners, Tees and Crosses, we think this works best for the first panel. The rest will naturally fit from there.

IMPORTANT! You want to make sure that there's a little bit of 'pinch' from the mounts into the panels, but not too much. They want to be snug. But not so snug the panels 'bow out' from your wall. You do need a little more pinch with the Ends and Connectors as they're smaller and less structured, and less pinch with the Corners, Tees and Crosses.

If you do find your first effort is a bit 'squiff' or not quite the right amount of snug, don't worry; you can easily take them off and re-fix more accurately.

No quibble free returns inc. postage within 30 days if they're unopened and unused.

Email support@fpmounts.com to get the process started.